1 technical data sheet 75 ohm n male connector clamp/solder attachment for rg59, rg62 75 ohm n male connector clamp/solder attachment for rg59, rg62 confguration connector n male connector interface type rg59,rg62 cable attachment method (shield/contact) clamp/solder body style straight electrical specifcations frequency range, mhz dc to 1,000 impedance, ohms 75 maximum vswr 1.3:1 maximum operating voltage, volts 1,000 dielectric withstanding voltage, vrms 2,500 mechanical specifcations temperature operating range, deg c -65 to +165 size length, in [mm] 1.39 [35.31] width/dia., in [mm] 0.8 [20] . weight, lbs [g] 0.082 [37.19] connector type n male contact material and plating brass, gold contact plating specifcation 30 in. minimum coupling nut material and plating brass, nickel coupling nut plating specifcation 100 in. minimum body material and plating brass, nickel body plating specifcation 100 in. minimum dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm n male connector clamp/solder attachment for rg59, rg62 PE4511 PE4511 PE4511 rev
2 technical data sheet 75 ohm n male connector clamp/solder attachment for rg59, rg62 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm n male connector clamp/solder attachment for rg59, rg62 PE4511 url: http://www.pasternack.com/n-male-standard-rg59-rg62-connector-PE4511-p.aspx 75 ohm n male connector clamp/solder attachment for rg59, rg62 PE4511 PE4511 rev
? 2013 pasternack enterprises all rights reserved 3 PE4511 rev scale n/a dwg title cad file 2233 fscm no. 53919 rev. a 120911 size a PE4511 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. slide clamp nut (1), washer (2) & gasket (3) over cable. strip cable as shown. do not nick braid while cutting jacket. taper end of braid to permit assembly of braid clamp (4). slide braid clamp (4) over braid & seat against cable. 2. form braid over clamp nut (4). trim braid back to shoulder. cut dielectric & center conductor to dimension shown. do not nick center conductor. solder contact to center conductor. remove excess solder. do not over heat dielectric. insert cable assembly into body & tighten. assembly procedures rg62 uses ptfe insert. insert ptfe before contact. taper end first. note 75 ohm n male connector clamp/solder attachment for rg59, rg62 PE4511 cad drawing
|
